Malco Marine MaxComplete Heavy Cutting Compound

Restore heavily weathered hulls and industrial finishes faster with MaxComplete Cutting Compound. Engineered for professional marine detailers and service shops, this advanced cutting abrasive tackles severe surface defects, chalky oxidation, and P600 or finer sanding scratches without scouring the substrate. Unlike traditional solvent-heavy pastes, its next-generation abrasive technology cuts aggressively while finishing down to an unexpected high-gloss shine, drastically reducing secondary polishing steps.

The water-based emulsion formula keeps surface temperatures lower, limits dusting, and rinses away easily with plain water—significantly speeding up job-site cleanup. Fully VOC-compliant in all 50 states, MaxComplete delivers uncompromising defect correction while remaining safe to handle in marine, marina, and industrial environments.

Key Features & Marine Benefits

• Aggressive Defect Removal: Levels heavy chalking, severe gelcoat oxidation, and P600+ grit sand marks in fewer passes.

• True One-Step Potential: Transitions from a fast, heavy cut to a clean, high-gloss finish to minimize finish-polishing time.

• Easy Water-Based Cleanup: Advanced emulsion reduces sling and dust, wiping clean easily with a microfiber towel or water rinse.

• Multi-Substrate Versatility: Optimized for marine gelcoat, structural fiberglass, industrial composites, and hard painted surfaces.

• 50-State VOC Compliant: Meets all regional and national environmental regulations for safe shop and marina use.